Laboratory mills
In laboratories, many different products are milled and no contamination should arise between these products. The mills should be easy to clean, or automatically clean themselves after milling a sample.
Peppink has been supplying the Peppink 100AN mill for laboratories for many years and, if it is necessary to mill finer, the Peppink 200AN mill can be used, which is available in different variants. In addition, Peppink supplies the Peppink 200CM mill, in which the sample is sucked through the mill, milled and dosed via a cyclone into a jar or plastic bag.
Peppink mills have been used for many years by various research institutions, such as Wageningen University & Research and the Flemish Research Institute for Agriculture, Fisheries and Food (ILVO), for scientific research.
Peppink 100 AN
- Capacity*: approx. 8-10 samples / hour
- Milling Chamber: ø100 mm x 20 mm
- Sieve: 360°
- Fineness*: approx. 250 - 20 μm
Peppink 200 AN sample mill
- Capacity*: approx. 8-10 samples / hour
- Milling Chamber: ø200 mm x 32 mm
- Sieve: 360°
- Fineness*: approx. 250 - 20 μm
Peppink 200 AN-C sample mill
- Capacity*: approx. 100 samples / hour
- Milling Chamber: ø200 mm x 32 mm
- Sieve: 170°
- Fineness*: approx. 250 - 20 μm
Peppink 200 AN-D sample mill
- Capacity*: approx. 30 samples / hour
- Milling Chamber: ø200 mm x 32 mm
- Sieve: 170°
- Fineness*: approx. 250 - 20 μm
Peppink 200 CM sample mill
- Capacity*: approx. 30 samples / hour
- Milling Chamber: ø200 mm x 41,5 mm
- Sieve: 130°
- Fineness*: approx. 250 - 20 μm
*indicative: these values depend on several variables, such as the product to be milled and the settings of the mill